Compare Products

Stihl MS 201 C-EM 14 in. Lightweight Bar 63PS3
Stihl MS 201 C-EM 14 in. Lightweight Bar 63PS3

Specs

General Information

Manufacturer
Stihl
Stihl
Model
MS 201 C-EM 14 in. Lightweight Bar 63PS3
MS 201 C-EM 14 in. Lightweight Bar 63PS3
Model Code
11452000290
11452000290
Color
Orange / White
Orange / White

Dimensions

Weight
Powerhead - 9 lb.
Powerhead - 9 lb.

Engine

Horsepower
2.41 bhp
2.41 bhp
Displacement
35.2 cc
35.2 cc
Fuel Type
Gas
Gas
Fuel Tank Capacity
10.5 oz.
10.5 oz.
Oil Capacity
Chain - 7.4 oz.
Chain - 7.4 oz.

Operational

Chain

OILOMATIC® 63 PS3

Pitch - 3/8 in.

Gauge - 0.050 in.

OILOMATIC® 63 PS3

Pitch - 3/8 in.

Gauge - 0.050 in.

Guide Bars
Length (Recommended) - 14 in. lightweight 7409
Length (Recommended) - 14 in. lightweight 7409

Other

Miscellaneous
Note: STIHL recommends #3616 (63 PS3 50) OILOMATIC® saw chain and 14 in. 3005 000 4809 Ematic™ guide bar combination. Compatible guide bar ranges: 12 in. to 16 in. The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on.
Note: STIHL recommends #3616 (63 PS3 50) OILOMATIC® saw chain and 14 in. 3005 000 4809 Ematic™ guide bar combination. Compatible guide bar ranges: 12 in. to 16 in. The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on.

Features

Features

  • EMATIC™ LUBRICATION SYSTEM: The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
  • STIHL QUICKSTOP®: STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
  • MASTER CONTROL LEVER™: The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
  • TRANSLUCENT FUEL TANK: Allows operator to easily check fuel level before starting work.
  • SIDE-ACCESS CHAIN TENSIONER: The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
  • STIHL EASY2START™ (E): The STIHL Easy2Start™ system makes starting STIHL outdoor power tools almost effortless, eliminating the need for a strong pull of the starting cord. This advanced starting system is designed to make starting STIHL products easier. The specific system may vary by model, but in each case, a quick pull overcomes the engine’s compression to minimize the strength and effort required to start. Available on selected products.
  • STIHL M-TRONIC™: This product features M-Tronic™ (M) - a new generation of Intelligent Engine Management that eliminates the low and high speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.
  • ADJUSTABLE AUTOMATIC OILER: The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.

Features

  • EMATIC™ LUBRICATION SYSTEM: The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
  • STIHL QUICKSTOP®: STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
  • MASTER CONTROL LEVER™: The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
  • TRANSLUCENT FUEL TANK: Allows operator to easily check fuel level before starting work.
  • SIDE-ACCESS CHAIN TENSIONER: The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
  • STIHL EASY2START™ (E): The STIHL Easy2Start™ system makes starting STIHL outdoor power tools almost effortless, eliminating the need for a strong pull of the starting cord. This advanced starting system is designed to make starting STIHL products easier. The specific system may vary by model, but in each case, a quick pull overcomes the engine’s compression to minimize the strength and effort required to start. Available on selected products.
  • STIHL M-TRONIC™: This product features M-Tronic™ (M) - a new generation of Intelligent Engine Management that eliminates the low and high speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.
  • ADJUSTABLE AUTOMATIC OILER: The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.