Compare Products

2016 Bush Hog 2810 Single Flex Wing in Jesup, Georgia — 2016 Bush Hog 2810 Single Flex Wing

View Details

Specs

Features

Specs

General Information

Manufacturer

Bush Hog

Model Year

2016

Model

2810 Single Flex Wing

Model Code

2810SINGLEFLEXWING

Color

Red

Dimensions

Cutting Width

10-feet 6-inches

Cutting Height

2 to 14-inches

Measurements

Skirt Depth

Side Band - 1/4-Inch x 12-inches

Wing Flex Angle

Wing Flex - 22° down / 87° up

Wing Free Float - 22° down / 45° up

Wing Flex - 22° down / 87° up

Wing Free Float - 22° down / 45° up

Deck Thickness

Top Deck Center Section - 11-gauge

Bottom Deck Center Section - 7-gauge

Deck, Wings - 7-gauge

Top Deck Center Section - 11-gauge

Bottom Deck Center Section - 7-gauge

Deck, Wings - 7-gauge

Blade Tip Speed

16,000-feet per minute

Blade Type

Blade Pan - Round

Cutting Capacity

4-inches

Operational

Hitch

Perma-Level

Driveline -- Wing

EZ lube, ASAE Cat. 4

Driveline -- Center

EZ Lube, ASAE CAT 6

Tractor Size

Minimum Tractor PTO HP - 60 HP

Gearbox HP Rating

Splitter Gearbox Rating - 250 HP

Cutting Gearbox Rating - 225 HP

Splitter Gearbox Rating - 250 HP

Cutting Gearbox Rating - 225 HP

Features

Construction Features

Industry first, massive 3-inch output shaft with up to 27% more splines than smaller shafts for maximum transmission of torqueto blade pan.
The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels.
Bush Hog’s E-Z lube drivelines are quick and easy to service. All grease fittings on the pto CV driveline and wing drivelines align for quick location of grease points. Since all grease fittings on all drivelines are in an up position on every 5th revolution, service times are reduced.

Performance Features

Wing and center skids are 3/8-inch thick for extended wear and outside edges are turned up at 45° to stop heavy ground contact that might damage the sidebands.
Center section blades properly align with center wheels to closely cut out the bottom of ditches.
Grease fittings and spring steel bushings at axle pivot points for longer life.
Free wing float without movement of the hydraulic cylinder rod is 22° down and 45° up.

Product Features

Industry first, massive three-inch output shaft with up to 27% more splines than smaller shafts for maximum transmission of torque to blade pan.
The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels.
Bush Hog’s E-Z lube drivelines are quick and easy to service. All grease fittings on the pto CV driveline and wing drivelines align for quick location of grease points. Since all grease fittings on all drivelines are in an up position on every 5th revolution, service times are reduced.

Safety Features

Highway safety lighting is standard.

Construction Features

Industry first, massive 3-inch output shaft with up to 27% more splines than smaller shafts for maximum transmission of torqueto blade pan.
The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels.
Bush Hog’s E-Z lube drivelines are quick and easy to service. All grease fittings on the pto CV driveline and wing drivelines align for quick location of grease points. Since all grease fittings on all drivelines are in an up position on every 5th revolution, service times are reduced.

Performance Features

Wing and center skids are 3/8-inch thick for extended wear and outside edges are turned up at 45° to stop heavy ground contact that might damage the sidebands.
Center section blades properly align with center wheels to closely cut out the bottom of ditches.
Grease fittings and spring steel bushings at axle pivot points for longer life.
Free wing float without movement of the hydraulic cylinder rod is 22° down and 45° up.

Product Features

Industry first, massive three-inch output shaft with up to 27% more splines than smaller shafts for maximum transmission of torque to blade pan.
The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels.
Bush Hog’s E-Z lube drivelines are quick and easy to service. All grease fittings on the pto CV driveline and wing drivelines align for quick location of grease points. Since all grease fittings on all drivelines are in an up position on every 5th revolution, service times are reduced.