Compare Products

2019 Cub Cadet Pro Z 54 in. L Kohler EFI 27 hp
2019 Cub Cadet Pro Z 54 in. L Kohler EFI 27 hp

Specs

General Information

Manufacturer
Cub Cadet
Cub Cadet
Model Year
2019
2019
Model
Pro Z 54 in. L Kohler EFI 27 hp
Pro Z 54 in. L Kohler EFI 27 hp
Model Code
53TWEHRA050
53TWEHRA050
Color
Cub Cadet Yellow
Cub Cadet Yellow

Body

Frame

Fully welded, full-legnth 12ga. channel frame with 14ga. reinforcements

Rear bumper - 5/16 in. Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch

Fully welded, full-legnth 12ga. channel frame with 14ga. reinforcements

Rear bumper - 5/16 in. Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch

Seat
High-back suspension with seat belt, adjustable arm rests and 6 in. seat travel
High-back suspension with seat belt, adjustable arm rests and 6 in. seat travel
Rollover Protection (ROPS)
2 x2 in. Foldable 3 Position Low Profile Clearance
2 x2 in. Foldable 3 Position Low Profile Clearance

Drivetrain

Transmission/Drive
12cc Hydro-Gear® ZT 3,400 with charge pumps
12cc Hydro-Gear® ZT 3,400 with charge pumps
Travel Speed

Forward - 9.5 mph

Reverse - 4.5 mph

Forward - 9.5 mph

Reverse - 4.5 mph

Axles
Front - 2 x 3 in. solid steel and 3/8 in. thick steel with sealed ball bearing front yokes
Front - 2 x 3 in. solid steel and 3/8 in. thick steel with sealed ball bearing front yokes
Wheels/Tires

Anti-Scalping - 2 Front HD with Bushings & Grease Zerk

Front - 13 x 6.5 - 6 in. (smooth)

Rear - 23 x 10.5 - 12 in.

Anti-Scalping - 2 Front HD with Bushings & Grease Zerk

Front - 13 x 6.5 - 6 in. (smooth)

Rear - 23 x 10.5 - 12 in.

Brakes
Parking - Intergrated system in Lap Bars for ease of use
Parking - Intergrated system in Lap Bars for ease of use

Engine

Engine Make
Kohler
Kohler
Engine Model
Confidant EFI Closed Loop EZT-750
Confidant EFI Closed Loop EZT-750
Horsepower
27 hp
27 hp
Displacement
747 cc
747 cc
Starter
Electric
Electric

Measurements

Length
With discharge chute UP and ROPs DOWN - 80 in.
With discharge chute UP and ROPs DOWN - 80 in.
Height
With discharge chute UP and ROPs DOWN - 48 in.

With discharge chute UP and ROPs DOWN - 48 in.

Width
With discharge chute UP and ROPs DOWN - 56 in.

With discharge chute UP and ROPs DOWN - 56 in.

Weight
1,000 lb.
1,000 lb.
Mowing Width
54 in.
54 in.
Mowing Height Range
1 - 5 in.
1 - 5 in.
Fuel Tank Capacity
Twin tanks - 3.5 gal. ea. (7 gal. total) with oversized filler opening
Twin tanks - 3.5 gal. ea. (7 gal. total) with oversized filler opening

Operational

Instrumentation

Hour meter - Standard electronic

Cup holder - Intergrated into Side Pod

Hour meter - Standard electronic

Cup holder - Intergrated into Side Pod

Steering
3/4 length padded bars with tooless quick adjust dial
3/4 length padded bars with tooless quick adjust dial
Safety Features
Operator presence
Operator presence

Other

Deck Construction

Top reinforcement(s) - 2 ga. (0.250 in.) top plate

Bottom reinforcement- 7ga. (0.175 in.) steel

Trim-Side Wear Guard - 3/4 in. Thick UHMW-PE Replaceable Trim-side Wear Guard

Size - 54 in. Fabricated

Floating, fabricated 10ga. (0.135 in.) steel shell (e-coated)

Fully welded 10 ga. (0.135 in.) steel deck shell with reinforcements totaling 0.560 in.

Hand Lever / 15 position / spring assist

Side - 5/16 in. (0.313) steel on trim and discharge sides

Top reinforcement(s) - 2 ga. (0.250 in.) top plate

Bottom reinforcement- 7ga. (0.175 in.) steel

Trim-Side Wear Guard - 3/4 in. Thick UHMW-PE Replaceable Trim-side Wear Guard

Size - 54 in. Fabricated

Floating, fabricated 10ga. (0.135 in.) steel shell (e-coated)

Fully welded 10 ga. (0.135 in.) steel deck shell with reinforcements totaling 0.560 in.

Hand Lever / 15 position / spring assist

Side - 5/16 in. (0.313) steel on trim and discharge sides

Spindles

Construction - 5 in. sealed cast aluminum housing (maintenance-free)

Covers - Steel - Tooless Quick Release

Construction - 5 in. sealed cast aluminum housing (maintenance-free)

Covers - Steel - Tooless Quick Release

Blades
(3) High-lift Marbain®
(3) High-lift Marbain®
Discharge
Chute - High-density, impact-resistant rubber
Chute - High-density, impact-resistant rubber
PTO
Warner Clutch - 125 ft. lb.
Warner Clutch - 125 ft. lb.
Warranty
2-year limited commercial (no hour limitations) or 4-year / 500-hour limited residential
2-year limited commercial (no hour limitations) or 4-year / 500-hour limited residential

Features

Features

  • CUSTOM LAP BAR DESIGN: Oversized zero-turn lap bars with quick-adjust knobs, full-length comfort grips and integrated automatic parking brake system reduces operator fatigue.
  • BEST-IN-CLASS DECK: Tackle the toughest conditions with the industry-leading only triple-7-gauge steel cutting deck: a 7-gauge deck shell with 7-gauge top and bottom reinforcements. Designed for durability, our decks produce a quality cut you can always count on.
  • MAINTENANCE MADE EASIER: Slash downtime thanks to Cub Cadet’s new spindle design. Completely sealed, dual double-row ball bearings make the spindle maintenance-free for its lifetime, and anti-friction washers prevent self-tightening, making blade maintenance easier.
  • ALL-DAY COMFORT: The PRO Z has been engineered to absorb the punches so your body doesn’t have to. Our exclusive air-ride seat allows you to adjust seat firmness to your personal preference for a smooth ride all day long.
  • BEEFED-UP FRONT END: Absorb the impact of rough terrain with new front-end construction featuring a best-in-class combination of axle, hub and yoke size. With an isolation-dampening system and maintenance-free ball bearings, the PRO Z is designed to handle the rigors of the job.

Features

  • CUSTOM LAP BAR DESIGN: Oversized zero-turn lap bars with quick-adjust knobs, full-length comfort grips and integrated automatic parking brake system reduces operator fatigue.
  • BEST-IN-CLASS DECK: Tackle the toughest conditions with the industry-leading only triple-7-gauge steel cutting deck: a 7-gauge deck shell with 7-gauge top and bottom reinforcements. Designed for durability, our decks produce a quality cut you can always count on.
  • MAINTENANCE MADE EASIER: Slash downtime thanks to Cub Cadet’s new spindle design. Completely sealed, dual double-row ball bearings make the spindle maintenance-free for its lifetime, and anti-friction washers prevent self-tightening, making blade maintenance easier.
  • ALL-DAY COMFORT: The PRO Z has been engineered to absorb the punches so your body doesn’t have to. Our exclusive air-ride seat allows you to adjust seat firmness to your personal preference for a smooth ride all day long.
  • BEEFED-UP FRONT END: Absorb the impact of rough terrain with new front-end construction featuring a best-in-class combination of axle, hub and yoke size. With an isolation-dampening system and maintenance-free ball bearings, the PRO Z is designed to handle the rigors of the job.